Ritter 222 and 223 Power Exam Tables Refurbished
Ritter 222 power exam table for sale
The Ritter 222 and 223 power exam tables and some of the most popular models
sold in the used-refurbished medical equipment marketplace. The Ritter 222 and 223
electric exam beds are referred to as “barrier free” because they sit just 18 inches off
the ground and do not require a step stool to go onto for patients. These exam tables
included stirrups and optional drawer warmer and storage attachment on the back.
What is the difference between a 222 and a 223 exam table models?
The main difference between a 222 and a 223 exam table is that the 222 unit is
only power up and down with a manual head section adjustment and a Ritter
223 has both power up and down and power head section up and down. Both
units aside from the power features are exactly the same.
What is the price of a Ritter 222 and Ritter 223 Exam Table – Exam Bed?
The range of price for both exam tables is generally about the same. The Ritter
222 exam table is normally priced around $2,495 and the Ritter 223 is normally priced
around $2,995. Contact us for more information on prices and availability. At iMedical
Equipment and Service we sell these exam tables and other Ritter and Midmark exam
tables from both our San Diego California, Cincinnati Ohio and Richmond Virginia
locations. We sell both manual and power electric exam table models both used-
refurbished and also new. Contact us below for prices on exam tables.
San Diego California 858-263-4894
Richmond Virginia – Ohio 804-929-6886
sean@imedequipservices.com
Ritter 222 power exam table for sale
Ritter 222 and 223 Exam Table Specifications
Patient Weight (maximum) …………………………..400 lbs (181.4 kgs)
Paper Roll (maximum size): …………………………21 in. long x 3.5 in. diameter
(53.3 x 8.9 cm)
Export models …………………………………………….19.7 in. long x 4.7 in. diameter
(50 cm x 12 cm)
Range of Motion ………………………………………….See illustration on this page
Dimensions …………………………………………………See illustration on next page
Weight of Table:
[230 VAC models only: 230 V transformer adds 14.5 lbs (6.5 kg)]
w/ upholstery ……………………………………………..325 lbs (147.4 kg)
w/packaging & skid (no upholstery) ……………..375 lbs (192.7 kg)
Weight of Upholstery:
w/packaging (shipped separately) ……………..40 lbs (18.1 kg)
Power Cord(s) [115V models have two cords]: ……8 ft. (243.8 cm) long
Electrical Rating: …………………………………………See Compliance Charts
Foot Control Voltage: …………………………………..14 VAC, SELV (Safety Extra Low Voltage)
Duplex Receptacle
maximum load: ………………………………………….115 VAC, 5A
Fuses: …………………………………………………………Refer to: Section E – Fuses
Duty Cycle:
Actuator motor run time: ………………………………..Intermittent Operation
(Domestic: 30 seconds ON / 5 minutes OFF)
(Export: 25 seconds ON / 7 minutes OFF)
Receptacle / Drawer Heater / Uph. Htr: …………..Continuous Operation
Classifications: ……………………………………………Class I, Type B Applied Part,
Ordinary Equipment, Intermittent Operation
(Domestic: 30 seconds ON / 5 minutes OFF)
(Export: 25 seconds ON / 7 minutes OFF)
Protection against ingress of fluids: …………….IPX0 [Foot Control only: IPX1]
Regulatory Compliance: ………………………………See Regulatory Compliance Charts
Table Speeds (by function):
Base …………………………………………………………….14 – 26 seconds
Back (models w/power back) ………………………….15 – 20 seconds
What is the difference between Ritter 222 and 223 and Midmark 622 and 623?
Ritter and Midmark is actually the same company. The difference between the Ritter exam tables and the Midmark exam tables is very small. The main difference between the Ritter and Midmark 222, 223 and 622 and 623 models is that the Ritter exam tables came out
with both square top and rounded seamless top and all of the Midmark 622 and 623
units came out with rounded top. It is often difficult to tell the models apart. They both
carry the Midmark brand and are both known to be very durable, reliable and made in the USA. See information on all these exam table models below.
Midmark 622 623 and Ritter 230 exam tables and ENT chair
Ritter 222 power exam table click here
Ritter 223 power exam table
